_edited.png)
Pakenham Warehouse Perimeter Security
FDC Industrial Complex Case Study
Security Fencing Australia supplied and installed a complete perimeter security system for FDC's large scale warehouse complex in Pakenham, Victoria, including the design of its 14 automated sliding gates. The finished site combines 2100mm spear top fencing, barbed chainwire, aluminium slat fencing, and 14 automated sliding gates into one integrated, high security boundary built to Australian Standards.
Project Overview
When construction and development group FDC needed a full perimeter security solution for its large scale warehouse complex in Pakenham, Victoria, it engaged Security Fencing Australia to supply and install a fencing and gate system built for a high throughput industrial site.The brief was straightforward to state and hard to deliver. FDC needed a strong physical deterrent, controlled vehicle and pedestrian access, and a system engineered to perform for decades, all within a tight construction programme on a live, evolving site.The ChallengeLarge scale warehouse and logistics sites like Pakenham carry a set of perimeter security demands that go well beyond standard commercial fencing. The site held high value stock and infrastructure that needed a strong physical deterrent against unauthorised access. Truck and freight movement was constant, which meant wide, heavy duty automated gates built for daily wear rather than occasional use. The site itself was mixed use, so the secure industrial perimeter, the staff amenity areas and the service access zones each needed a different fencing approach rather than one blanket solution.
-
Client: FDC (construction and development group)
-
Location: Pakenham, Victoria
-
Sector: Industrial / Warehouse & Logistics
-
Contractor: Security Fencing Australia
-
Primary perimeter fencing: 2100mm spear top fencing
-
Reinforced zones: Chainwire fencing with 3 rows of barbed wire
-
Automated vehicle gates:14 large automated sliding gates
-
Other access points: Swing gates, pedestrian security gates
Overcoming Project Challenges
Security Fencing Australia delivered a layered perimeter security system, matching each zone of the site to the fencing and gate type best suited to its function.The primary high security perimeter line uses 2100mm high spear top fencing, chosen for its strong anti climb deterrent and the clear visual security presence it gives the site boundary. In higher risk perimeter zones, chainwire fencing fitted with three rows of barbed wire adds a further layer of physical protection where it matters most. Staff outdoor areas take a different approach entirely. Aluminium slat fencing was installed here to balance privacy and presentation with durability, giving these areas a more welcoming feel in contrast to the high security industrial lines elsewhere on site. Site entry was managed through 14 large automated sliding gates, designed and engineered for high frequency vehicle and freight movement, along with swing gates and pedestrian security gates for controlled foot traffic and secondary access points. Service enclosures were also added to secure plant, equipment and utility areas separately from the main perimeter line.Every element was engineered to work as one system, from the anti climb perimeter line through to automated vehicle access, so the finished site reads as a single, consistent security standard rather than a patchwork of separate solutions.
The Result
FDC's Pakenham warehouse complex now operates with a complete, integrated perimeter security system. The site has a consistent, high security boundary line running its full length, efficient and high capacity vehicle access through 14 automated sliding gates, and controlled pedestrian and secondary access points throughout. The materials chosen are durable and low maintenance, suited to a working industrial environment, and the fencing design adapted successfully to real world site conditions, including the tie ins with existing structures.
From initial planning through to final installation, the project reflects the standard Security Fencing Australia applies to every large scale industrial fencing project: engineered solutions, Australian Standards compliance, and long term performance built for the way the site actually operates.
Why This Project Matters
A warehouse or logistics site is only as secure as its weakest perimeter point. The Pakenham project shows how combining several fencing systems, high security spear top, reinforced chainwire, automated gates and amenity fencing, into one cohesive design delivers stronger, more practical protection than any single fencing type could provide on its own. It follows the same approach used on our other industrial warehouse security fencing projects across Melbourne and Victoria.
Frequently Asked Questions
What is spear top fencing used for?
Spear top fencing is a high security perimeter fencing system with pointed steel pales. It's commonly used around industrial and commercial sites to create a strong physical and visual anti climb deterrent along the primary security boundary.
Why use chainwire fencing with barbed wire on an industrial site?
Chainwire fencing fitted with multiple rows of barbed wire adds an extra deterrent layer in high risk perimeter zones, protecting high value stock, plant and infrastructure beyond what standard fencing alone provides.
How many automated gates were installed at the Pakenham site?
Fourteen large automated sliding gates were installed to manage high frequency vehicle and freight access across the FDC Pakenham warehouse complex.
Can fencing be tied into existing retaining walls or structures?
Yes. On the Pakenham project, the perimeter fencing design was modified to connect with existing retaining walls, so there were no gaps in the security line despite changes to the original site conditions.
Who delivered the Pakenham FDC warehouse security fencing project?
Security Fencing Australia delivered the full project scope, including engineering, supply and installation of the perimeter fencing, and design, supply and installation of the automated sliding gates and service enclosures.
How much does industrial perimeter security fencing cost in Melbourne?
Cost depends on fencing type, site length, gate automation and site specific engineering, such as tie ins with existing structures. Security Fencing Australia provides project specific estimates after an on site or plan based assessment.